Penticton Forklift Training Schools

Penticton Forklift Training Schools - What Could Individuals Learn From Our Forklift Training Schools

Are you searching for work as a driver of a forklift? Our regulatory-compliant mobile equipment operator training offers instruction in types of forklifts, pre-shift inspection, fuel kinds and handling of fuels, and safe operation of a forklift. Hands-on, practical training assists individuals participating in obtaining essential operational skills. Course content includes current regulations governing the use of lift trucks. Our proven forklift courses are meant to offer training on these kinds of trucks: counterbalanced forklift, powered pallet trucks and narrow isle forklift.

While the forklift is in operation, do not lower or raise the forks. Loads must not extend higher than the backrest. This is because of the danger of the load sliding back towards the operator. Inspect for overhead obstructions and ensure there is plenty of clearance prior to raising a load. Stay away from overhead power lines. Once the load is lifted straight up, tilt it back slightly.

While the load is lifted the lift truck will be less stable. Make sure that no pedestrians cross under the elevated fork. The operator must not leave the forklift while the load is lifted.

While handling pallets, forks should be high and level enough to go into the pallet and extend all the way below the load. The fork's width should provide even weight distribution.

Chock the wheels and set the brakes prior to loading and unloading the truck. The floors should be strong enough to support the weight of both the load and the forklift. Fixed jacks could be installed to be able to support a semi-trailer that is not attached to a tractor. The entrance door height must clear the forklift height by a minimum of 5 cm. Mark edges of docks, rail cars or ramps and avoid them.

Click to Download the pdf